Category: Essays

The quality of the user experience is very important to the success of an application. In the early days of computing, users often experienced long delays since computing power was poor and networks had comparatively slow throughput. Modern systems have largely eliminated these delays due to increased network and computing power, yet users still report a high level of frustration.

Write a four to five (4-5) page paper in which you:

Describe three (3) reasons users are still frustrated with modern applications.

Suggest one (1) method for reducing the frustrations for each of the reasons you supplied in Question one (1).
Describe methods for determining if user frustration is caused by poor system design or from the natural frustration associated with learning a new software product.
Suggest at least three (3) methods to reduce the frustrations among the disabled population and how this population can be better served.
Use at least three (3) quality resources in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources.

Your assignment must follow these formatting requirements:

Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.

Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length

The quality of the user experience is very important to the success of an application. In the early days of computing, users often experienced long delays since computing power was poor and networks had comparatively slow throughput. Modern systems have largely eliminated these delays due to increased network and computing power, yet users still report a high level of frustration.

 

 

 

Write a four to five (4-5) page paper in which you:

 

1. Describe three (3) reasons users are still frustrated with modern applications.

 

2. Suggest one (1) method for reducing the frustrations for each of the reasons you supplied in Question one (1).
3. Describe methods for determining if user frustration is caused by poor system design or from the natural frustration associated with learning a new software product.
4. Suggest at least three (3) methods to reduce the frustrations among the disabled population and how this population can be better served.
5. Use at least three (3) quality resources in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources.

 

 

 

Your assignment must follow these formatting requirements:

 

• Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.

 

Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.

Early computer systems relied on command line interfaces to perform all actions. Today, the majority of systems use direct manipulation rather than a command line interface. The goal of designing a direct manipulation interface is to make use of the system intuitive to the end user. One industry that has been extremely successful designing intuitive direct manipulation inputs is the video game industry. Most game players are able to learn controls as they play a game and then apply the same controls to similar games. Rarely do they need to read a user manual.

Write a four to five (4-5) page paper in which you:

Describe the three (3) principles of direct manipulation and give examples as to how they are used in video game controls.

Analyze video game-type interfaces and discuss three (3) reasons why video game-type interfaces would not be effective for real-world applications.

Describe at least three (3) advantages of direct manipulation versus command line interfaces.
Evaluate direct manipulation and describe three (3) problems with it.
Use at least three (3) quality resources in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources.

Your assignment must follow these formatting requirements:

Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length

Early computer systems relied on command line interfaces to perform all actions. Today, the majority of systems use direct manipulation rather than a command line interface. The goal of designing a direct manipulation interface is to make use of the system intuitive to the end user. One industry that has been extremely successful designing intuitive direct manipulation inputs is the video game industry. Most game players are able to learn controls as they play a game and then apply the same controls to similar games.  Rarely do they need to read a user manual.

 

Write a four to five (4-5) page paper in which you:

 

1. Describe the three (3) principles of direct manipulation and give examples as to how they are used in video game controls.
2. Analyze video game-type interfaces and discuss three (3) reasons why video game-type interfaces would not be effective for real-world applications.

 

3. Describe at least three (3) advantages of direct manipulation versus command line interfaces.
4. Evaluate direct manipulation and describe three (3) problems with it.
5. Use at least three (3) quality resources in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources.

 

 

 

Your assignment must follow these formatting requirements:

 

• Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
• Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length

This is a two part written project that will focus on the marketing aspects of your start up business. Please submit as one written assignment.

Part 1:

In three to four pages, address the following areas:

Part 2:

In five to six pages, address the following areas:

This is a two part written project that will focus on the marketing aspects of your start up business. Please submit as one written assignment.

Part 1:

In three to four pages, address the following areas:

Please describe the marketing strategy and then explain how you plan to use marketing strategies to promote your business.

Include the necessary marketing research you either have done for your business or are planning to conduct. The costs of these items/activities should also be itemized and included in this section of the proposal.

Include ongoing costs as well as one-time fees.

Part 2:

In five to six pages, address the following areas:

Create a marketing plan for your business. This can be an e- marketing, traditional marketing plan, or a combination of both.

Discuss the benefits of market research.

Include a SWOT analysis and explain the four Ps of the marketing mix in your marketing plan\

Assignment 1: LASA 2 – Development of a Healthcare Business Unit’s Strategy

Due Monday, December 7, 2015.

Identify a health care organization for which a significant amount of information is available, in books, journals, reports, or on the Internet. Conduct an audit of the organization’s strategic assets based on the information you are able to gather from various sources. The audit you conduct will not be as thorough and detailed of an audit as the organization itself might conduct as you will not have access to the same inside information as internal auditors. Do your best to gather and report the following information.

Start with a general description of the service that the healthcare organization provides.  Include the mission statement for the organization.  If there is not one, create one you believe would best describe the mission of the organization.

The first part of your audit should address the organization’s historical financial performance and its current financial condition, as described in your textbook. A lot of the necessary data can be found in the organization’s annual report and its filings with the Securities and Exchange Commission (SEC) and state-level government regulatory agencies. Research sources such as business journals, magazines, and other media that report on these types of organizations.

The second part of the audit should describe in as much detail as possible what you consider to be the major resources and competencies of the organization.  Use a SWOT chart to categorize the most relevant points (these may be more narrative than quantitatively analytical). Try to identify assets that appear to be unique to the organization and that give it some competitive advantage over its rivals. Also make a note of areas in which the organization is weak, which might be the target of strategic attacks by those rivals.

Now consider the activities that are described in the value chain for this organization.  Which do you believe cost the most to perform?  What factors do you base your opinion on? What do you believe can be done to reduce the costs, thereby giving this organization a competitive edge?

Finally, consider that this organization would like to set up a satellite office in a nearby city.  In this satellite office they will make changes to their processes to address their strengths, weaknesses, opportunities and threats.  Develop a mission statement for this satellite office.  Create four strategic goals for this office, one for each SWOT category.

Use the HCM401 – LASA2 Template, to organize your work.

Make sure your final paper (6-8 pages) follows APA guidelines with a title page, reference page (include at least three scholarly references), in text citations, double space throughout, indent paragraphs 5 spaces and use section headers to differentiate the sections.

(Moseley III, George B. . Managing Health Care Business Strategy. Jones & Bartlett Publishers, May 2008. pp

 mini factory to supply the DXL clothing stores in the Chicago area

Compose an analysis that addresses each of the following: • Thoroughly provide rationale for why you chose the plan you did • Describe specifically how your plan addresses the 3 UDL principles • Thoroughly justify your chosen accommodations/modifications to be used during the lesson • Briefly describe how you might assess whether this person/group with disability is achieving your intended objectives. • Describe potential challenges to your ‘inclusive’ lesson/activity plan decisions • Personal thoughts/reactions/reflections about your plan • Any other pertinent considerations (e.g., alternatives or plan B) you find important to share with other professionals

You’ve just been hired onto ABC Company as the corporate controller. ABC Company is a manufacturing firm that specializes in making cedar roofing and siding shingles. The company currently has annual sales of around $1.2 million, a 25% increase from the previous year. The company has an aggressive growth target of reaching $3 million annual sales within the next 3 years. The CEO has been trying to find additional products that can leverage the current ABC employee skillset as well as the manufacturing facilities.

As the controller of ABC Company, the CEO has come to you with a new opportunity that he’s been working on. The CEO would like to use the some of the shingle scrap materials to build cedar dollhouses. While this new product line would add additional raw materials and be more time-intensive to manufacture than the cedar shingles, this new product line will be able to leverage ABC’s existing manufacturing facilities as well as the current staff. Although this product line will require added expenses, it will provide additional revenue and gross profit to help reach the growth targets. The CEO is relying on you to help decide how this project can be afforded Provide details about the estimated product costs, what is needed to break even on the project, and what level of return this product is expected to provide.

In order to help out the CEO, you need to prepare a six- to eight-page report that will contain the following information (including exhibits, but excluding your references and title page). Refer to the accompanying Excel spreadsheet (available through your online course) for some specific cost and profit information to complete the calculations.

Final Paper Spreadsheet

An overall risk profile of the company based on current economic and industry issues that it may be facing.

Current company cash flow

You need to complete a cash flow statement for the company using the direct method.
Once you’ve completed the cash flow statement, answer the following questions:

What does this statement of cash flow tell you about the sources and uses of the company funds?
Is there anything ABC Company can do to improve the cash flow?

Can this project be financed with current cash flow from the company? Why or why not?
If the company needs additional financing beyond what ABC Company can provide internally (either now or sometime throughout the life of the project), how would you suggest the company obtain the additional financing, equity or corporate debt, and why?

Product cost: ABC Company believes that it has an additional 5,000 machine hours available in the current facility before it would need to expand. ABC Company uses machine hours to allocate the fixed factory overhead, and units sold to allocate the fixed sales expenses. Bases on current research, ABC Company expects that it will take twice as long to produce the expansion product as it currently takes to produce its existing product.

What is the product cost for the expansion product under absorption and variable costing?
By adding this new expansion product, it helps to absorb the fixed factory and sales expenses. How much cheaper does this expansion make the existing product?
Assuming ABC Company wants a 40% gross margin for the new product, what selling price should it set for the expansion product?
Assuming the same sales mix of these two products, what are the contribution margins and break-even points by product?

Potential investments to accelerate profit: ABC company has the option to purchase additional equipment that will cost about $42,000, and this new equipment will produce the following savings in factory overhead costs over the next five years:

Year 1, $15,000

Year 2, $13,000

Year 3, $10,000

Year 4, $10,000

Year 5, $6,000

ABC Company uses the net-present-value method to analyze investments and desires a minimum rate of return of 12% on the equipment.

What is the net present value of the proposed investment (ignore income taxes and depreciation)?
Assuming a 5-year straight-line depreciation, how will this impact the factory’s fixed costs for each of the 5 years (and the implied product costs)? What about cash flow?
Considering the cash flow impact of the equipment as well as the time-value of money, would you recommend that ABC Company purchases the equipment? Why or why not?

Conclusion:

What are the major risk factors that you see in this project?
As the controller and a management accountant, what is your responsibility to this project?
What do you recommend the CEO do?

Writing the Final Paper

Must be six to eight double-spaced pages in length, and formatted according to APA style as outlined in the Ashford Writing Center.
Must include a title page with the following:
Title of paper
Student’s name
Course name and number
Instructor’s name
Date submitted
Must begin with an introductory paragraph that has a succinct thesis statement.
Must address the topic of the paper with critical thought.
Must end with a conclusion that reaffirms your thesis